X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from cdptpa-omtalb.mail.rr.com ([75.180.132.120] verified) by logan.com (CommuniGate Pro SMTP 6.0c1) with ESMTP id 5718013 for flyrotary@lancaironline.net; Sun, 19 Aug 2012 07:30:51 -0400 Received-SPF: pass receiver=logan.com; client-ip=75.180.132.120; envelope-from=eanderson@carolina.rr.com Return-Path: X-Authority-Analysis: v=2.0 cv=Dp/UCRD+ c=1 sm=0 a=g3L/TDsr+eNLfIieSKfGkw==:17 a=AHkS0RJitIMA:10 a=ylTii8H9SOsA:10 a=05ChyHeVI94A:10 a=8nJEP1OIZ-IA:10 a=_Gzotw4325QA:10 a=ayC55rCoAAAA:8 a=UKPAHat8AAAA:8 a=Ia-xEzejAAAA:8 a=glYVDZ00AAAA:8 a=7g1VtSJxAAAA:8 a=oCcaPWc0AAAA:8 a=c59DL73hcmSATbXM0YsA:9 a=wPNLvfGTeEIA:10 a=Qa1je4BO31QA:10 a=7god_763jbgA:10 a=EzXvWhQp4_cA:10 a=XCwpvLtFMdsA:10 a=g3L/TDsr+eNLfIieSKfGkw==:117 X-Cloudmark-Score: 0 X-Originating-IP: 174.110.170.10 Received: from [174.110.170.10] ([174.110.170.10:54812] helo=EdPC) by cdptpa-oedge02.mail.rr.com (envelope-from ) (ecelerity 2.2.3.46 r()) with ESMTP id 38/AF-13948-74EC0305; Sun, 19 Aug 2012 11:30:15 +0000 Message-ID: <87BA33B1E34E4CE9AA358DDA3F72186B@EdPC> From: "Ed Anderson" To: "Rotary motors in aircraft" References: In-Reply-To: Subject: Re: [FlyRotary] Re: Standard oil cooler port. Date: Sun, 19 Aug 2012 07:30:15 -0400 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal Importance: Normal X-Mailer: Microsoft Windows Live Mail 14.0.8117.416 X-MimeOLE: Produced By Microsoft MimeOLE V14.0.8117.416 If you just remove the oil thermostat in the stock Mazda oil cooler - you will seriously impair your oil cooling ability. The removal will permit major oil flow directly from input port to output port without going through the cooling coils of the oil cooler. It is likely that you could block the cross feed hole - and remove the thermostat, but I suspect it won't be easy. Looking at the diagram in the RX-7 manual, it appears that if you could find a threaded plug (undoubtedly metric threads with an hex socket head for inserting Allen wrench and tightening) that would screw up into the thermostat hole - you could block the oil cross feed. Then you would, of course need to block the normal outlet port and find an oil fitting that will screw into the hole where the large plug now exists. I've never looked but I suspect you may have trouble finding such. Good luck Ed -------------------------------------------------- From: "Bobby J. Hughes" Sent: Saturday, August 18, 2012 10:17 PM To: "Rotary motors in aircraft" Subject: [FlyRotary] Re: Standard oil cooler port. > Chris > > I think the thermostat hole can be plugged but I don't know the details. > > Bobby Hughes > > > > > Sent from my iPad > > On Aug 18, 2012, at 6:57 PM, "Chris Barber" > wrote: > >> On the standard Mazda oil cooler there is a port next to and 90 degrees >> off from the port on the end of the cooler. What is this port for? There >> is a large hex topped bolt in the hole. >> >> Could I use this location to run a line to instead of the one on the end? >> It would greatly clean up a plumbing issue I have as currently my the >> port on the end protrudes out of my cowl slightly. If I can use this >> other port I could likely eliminate adding a blister. >> >> Thanks. >> >> Chris >> 2nd gen 13b >> 1.6 hrs As of yesterday. Flight five. >> >> Sent from my iPhone 4 >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: >> http://mail.lancaironline.net:81/lists/flyrotary/List.html > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: > http://mail.lancaironline.net:81/lists/flyrotary/List.html > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2012.0.2197 / Virus Database: 2437/5208 - Release Date: 08/18/12