Mailing List flyrotary@lancaironline.net Message #58389
From: Finn Lassen <finn.lassen@verizon.net>
Subject: Re: [FlyRotary] N655HC FIRST FLIGHT.
Date: Fri, 15 Jun 2012 08:59:44 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Congratulations!

If you do remove the thermostat do not forget to block the hole. I forget the details. Others can give you the specifics.

Finn

On 6/14/2012 10:43 PM, hoursaway1@comcast.net wrote:

Short flight, seasoned fighter/experimental RV8 builder test pilot, twice around the patch, 5950 RPM, coolant went to 220F on climb out, oil was at 210F, 78F OAT, temps climbed a little higher, powered back & setup for landing.  This is an RV6A Rotary, five years in the making, 13B Bruce T. aircraft modified eng., 2.17 RWS drive, EC2, EM2, Ivoprop Magnum 65-105 deg. elect. in-flight adjust., Hushpower res./muffler, intake similar to Tracy's RV4 before the Ren. eng.,  my own Dynamic chamber, 3" throttle body.  I do currently have a 180F therm. installed, might try removing to look for lower temp. #s, Then louvers in bottom of lower cowl, need more flight tests, cowl & coolers & inlets are very similar to Ed Anderson's RV6A Rotary, thanks Ed, Bill E., Tracy C.,  Dave L.,  & all the folks on THE LIST.  David R. Cook  RV6A Rotary aircraft.  Lansing MI 


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster