|
|
Posted for "sqpilot@earthlink" <sqpilot@earthlink.net>:
I used an 0.035 restrictor ( I presume you meant 0.040 vice 0.4) in the
oil
line. I don't know the size of the Nitrous Line but, if not sufficient
restriction you will leak oil past the rear shaft seal.
Ed
Thanks, Ed. The Nitrous line has an ID around .125 I will take one of my
1/8 NPT to -4AN aluminum adapters, and have the inside hole welded closed,
and drill an .040 hole thru that. (Might as well make one of the fittings I
already must use into a restrictor instead of adding something else).
Thanks again for the info. We are fortunate to have you and your experience
here, Ed. Paul Conner
|
|