X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from relais.videotron.ca ([24.201.245.36] verified) by logan.com (CommuniGate Pro SMTP 5.4c2o) with ESMTP id 4882939 for flyrotary@lancaironline.net; Fri, 25 Feb 2011 17:45:32 -0500 Received-SPF: pass receiver=logan.com; client-ip=24.201.245.36; envelope-from=lamber@videotron.ca MIME-version: 1.0 Content-transfer-encoding: 8BIT Content-type: text/plain; charset=windows-1252; format=flowed Received: from [127.0.0.1] ([74.56.197.125]) by VL-MR-MRZ22.ip.videotron.ca (Sun Java(tm) System Messaging Server 6.3-8.01 (built Dec 16 2008; 32bit)) with ESMTP id <0LH700CQ436V7I60@VL-MR-MRZ22.ip.videotron.ca> for flyrotary@lancaironline.net; Fri, 25 Feb 2011 17:44:55 -0500 (EST) Message-id: <4D6830E7.6030202@videotron.ca> Date: Fri, 25 Feb 2011 17:44:55 -0500 From: Raymond Lambert User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.13) Gecko/20101207 Lightning/1.0b2 Thunderbird/3.1.7 To: Rotary motors in aircraft Subject: Re: [FlyRotary] Re: Fuel return line References: In-reply-to: It's 3/8 out so it will be the same for the return. One more question, the return line will on the side of the thank, does it make any difference if it comes in at the top or anywhere else on the side? Raymond On 2/25/2011 4:36 PM, Ernest Christley wrote: > Rogers, Bob J. wrote: >> Raymond, >> >> >> >> For a high-pressure fuel pump that generates a large volume of fuel >> flow, a 1/4“ return line seems a bit small to me. If you attach a >> fuel pressure gauge to a “T” midway in the ¼” return line and run >> fuel through your pump and out the return line (past the pressure >> gauge), when the return line is big enough to handle the flow, then >> you will see almost no build up in pressure. If the line is too >> small, then the inability of the fuel to easily escape through the >> return line will cause a build-up of pressure in the gauge. The >> amount may be negligible or it may be a lot, depending on the force >> of the fuel. Ideally, the pressure on the return line would be zero, >> or close to it. Use a return line that generates little or no >> pressure on the fuel pump. >> >> >> > > Better yet, just make the return line the same size as the feed line. > Save money by not having to have more sizes on hand, completely > eliminate the return pressure problem AND simplify your life. > > Better yet, put the regulator at the tank, and don't bring hot fuel > back from the engine. Once it goes pass the firewall, the only way > out is through the fiery furnace. > >> >> ------------------------------------------------------------------------ >> >> *From:* Rotary motors in aircraft >> [mailto:flyrotary@lancaironline.net] *On Behalf Of *Raymond Lambert >> *Sent:* Friday, February 25, 2011 2:20 PM >> *To:* Rotary motors in aircraft >> *Subject:* [FlyRotary] Fuel return line >> >> >> >> /I am about to put /the fuel tank in my first wing. I have to weld a >> flange on it for the fuel return line. Anyone can tell me if a 1/4" >> fuel return line is large enough ???? >> >> Raymond >> > > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: > http://mail.lancaironline.net:81/lists/flyrotary/List.html >