Mailing List flyrotary@lancaironline.net Message #53247
From: <DLOMHEIM@aol.com>
Subject: Re: pump housing.jpg
Date: Sun, 12 Dec 2010 22:02:58 EST
To: <flyrotary@lancaironline.net>
From: Kelly Troyer <keltro@att.net>
Subject: Re: [FlyRotary] Re: pump housing.jpg
Date: Sun, 12 Dec 2010 15:25:20 -0800 (PST)
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Doug,
   Do I see a broken Stud in the photo ??........................<:)
 

Kelly Troyer

Kelly:  Thanks for the inputs...I do have what appears to be the Racing Beat dual pulley.  My buddies heavy duty 1/2 inch air impact spun it off nicely and then it was an easy matter to get the housing off and cleaned up.  Studs are all good but a bit of rust on one of them.  I'm going to buy some new gaskets tomorrow and get it reassemble. 

I drilled a hole in the housing and tapped it (like Mark Steitle) in order to feed cooled hi pressure water to my water to oil cooler that will be mounted on the firewall...

If you get out to your hanger some weekend end let me know...I'd like to see your project again sometime!

Doug 

 

 

Image
Water Pump Housing NPT Fitting.jpg
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster