Chrissi,
Before you part with any money please be advised that the 93-95 water pump is reverse rotation
from all previous Rotary pumps..........The 93-95 pump is driven by the flat side of a ribbed belt........
If might be advantageous to use the 89-91 pump and housing (normally V belt but pulleys for ribbed
belt can be adapted or purchased)............If the weight of the cast iron 89-91 pump is a problem one
of our "FlyRotary" guys Mark Steitle (Lancair ES, P port ,na 20B) has adapted the "Renesis" RX8
pump to his engine and uses a flat ribbed belt to drive it ( See Attached photo)...........FWIW
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Back plate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From: "CozyGirrrl@aol.com" <CozyGirrrl@aol.com>
To: keltro@att.net
Sent: Sun, November 21, 2010 12:59:56 PM
Subject: Re: [FlyRotary] Re: Fwd: rx parts
Thanks for the input, we'll give them a call Monday!
...Chrissi
In a message dated 11/21/2010 12:22:15 P.M. Central Standard Time, keltro@att.net writes:
Girrls,
I suggest Brian Galloway in Torrance , Calif (310-901-4805) as a source recommended by Greg Ward...........I
called Brian on Saturday morning and had the part I needed on the way by UPS that afternoon............
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From: Bill Bradburry <bbradburry@bellsouth.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Fri, November 19, 2010 8:38:26 PM
Subject: [FlyRotary] Re: Fwd: rx parts
Marcs Import Salvage in Sanford , Fl has about 150 Mazda cars in his wrecking yard.
407-322-8961 or 407-314-0597
Bill B
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bob Tilley
Sent: Friday, November 19, 2010 8:28 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Fwd: rx parts
Can anyone help out the Cozy girrls?
Cozy III N49JB
Begin forwarded message:
ugh, I am tired of fighting with Randi on this one. We need basically everything for the front of a motor from the front iron on out to the pully for a 93-95 mazda. Except the alternator. Randi won't go to a dealer. Finally this morning she went to a junk yard and they had one 3rd gen w/o a motor after an hours drive, so of course its my fault for not going out to "all my resources on the net".
Where do we begin to look or who do we talk to. We are not on any of the lists, obviously not lamars. Tracy has no 3rd gen parts, Bruce does not either. We have been having this same argument for the last four years, hence no progress on the engine.
Any ideas would be appreciated.