Doug,
Level sender bolts to side of stock oil pan...........see photo below from Mazdatrix......Appears
to be a float..........I have not looked at one for ages but probably have at least half a dozen at the
hangar..........You would need to look at Mazda wiring skematic for hookup.........Should not be a
major deal...........Will hunt one up next time I am at hangar !!.........
| Oil Level Sensors and Oil Pressure Senders |
| Oil Level Sender (79-80) |
No Longer Available |
 |
| Oil Level Sender (81-85) |
10-7300-N201 |
| Oil Level Sender (86-92) |
10-4700-N326 |
| O-Ring For Oil Level Sender |
10-T110-N326 |
 |
| Oil Pressure Sensor (81-92) |
14-8200-N201 |
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
From: "dlomheim@aol.com" <dlomheim@aol.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Tue, August 10, 2010 9:11:48 AM
Subject: [FlyRotary] Low oil level
I have heard that the 13B has a low oil level device (that turned on a light in the car?). Can someone briefly explain how that works? Float switch system, etc. The way my inititial intake pipes are routed I won't be able to check oil so would like to use this or a similar swiched device to know if oil level is down...
Thanks. Doug / RV-9A FWF
Sent on the Sprint® Now Network from my BlackBerry®
--
Homepage: http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html