A few weeks ago I wrote that I had run up the engine to 4500 RPM, but that
was not WOT. I went up and ran it today,WOT, and got the following
results.
Temperature today~ 70 F
Humidity- high, maybe 80%
RPM 5660
MP- didn't remember to look
Prop Catto 74 DIA x 88 pitch
Engine 93 13BREW N/A
Primary injectors - stock, 28 lb.
Secondary injectors stock 40 lb.
PRSU RWS 2.85/1
RWS EM2 said it was making 161 hp. at 5660 RPM
Tail wheel was tied down, the brakes don't seem to hold at WOT even on dry
cement.
My induction system was not hooked up, it was configured as shown in the
photo.
I think, based on the above, that I might see 194 HP at 6800 RPM, which is
2386 RPM at the prop. Anyone who can calculate this more accurately, or shed
more light, please go ahead and 'splain it to me.
In any case, I'm pretty sure it will be able to get off the ground.
The airworthiness inspection is completed, taxes are paid, and registration
should arrive in the next few days. I'm still working on my tail wheel
endorsement, I should have it by the time my instructor makes his next car
payment, I hope. Also, trying to get some time in some tail wheel RV's. There
are several people who have offered to take me up to get a feel for how they
fly.
Steve Beckham and Mark Hatch graciously flew up to give the plane some
scrutiny two weeks ago.
So, depending on how the stars line up, This plane might be airborne by the
end of the month.
Brian Trubee