Sent: Wednesday, January 07, 2004 10:52
AM
Subject: [FlyRotary] Re: expansion
tank
I found that there is a 5/8" barbed heater
core nipple underneath the oil filter. I had originally figured on using
that to go to the heater core. There is another area for a fitting on the
water pump. It is an angled fitting right next to the very bottom of the water
pump where the large -16 hose will connect. See area labeled "connection 2" on
the picture of the water pump. I had planned on using that for the other
connection to the heater core. Finally, there is also another plug on the
water pump labeled "connection 1" in the same picture. I have no idea what
that is/was for. Any suggestions on how to incorporate a heater core and
this expansion tank into my system?
I believe the barb you are referring to was actually a
coolant line plumbing to the intake manifold instead of the heater. The
heater outlet is on the spark plug side of the engine.
Ed Anderson