I'm considering going to a heat muff since there is sooooooo much exhaust heat that's just going to waste. I was going to incorporate it into the heat shield of my newest muffler design. Of course, I'll need to add a CO detector in the cabin for safety.
Mark
On Tue, Dec 15, 2009 at 3:24 PM, Jeff Whaley
<jwhaley@datacast.com> wrote:
Well with 3 coolers already, I didn’t want to add a heater core and all the plumbing – I may move my scavenge point from oil cooler to water radiator as it is below the engine (uphill for warm air) and closer to the firewall (fewer corners to turn). I picked the oil cooler because at the time my oil temp was higher than water temp – now it’s the other way around … also the outlet of oil cooler as installed is less likely to get contaminated with exhaust fumes.
Jeff