You mean the long bolts that are wrapped with tape or beaded with
silicone to help prevent resonance (and therefore semi insulated? ... no, these only contact the end housings.

Or the pan bolts that run through and are coated with paint, sealant,
contacting an anodized plate, etc ...  yes, I did mean the 20 pan bolts, but now realize there are another 6-8 tying the intake manifold across the block as well.

With a plastic plane, I leave NOTHING to chance and run the ground wires
big, and direct. ... good idea.
Jeff

Dave

Jeff Whaley wrote:
>
> I'm curious about the engine mount style you guys are using with this
> voltage drop situation.
>
> I can't imagine this problem occurring with the bed-mount/aluminum
> plate between the oil pan and engine block configuration.
>
> Surely a 3/8" or ½" plate of aluminum and 20 bolts will conduct from
> housing to housing? - unless maybe it was anodized?
>
> Jeff
>


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html