Bryan,

Yes they check good with the feeler gauge and I can find very little wear
with a dial indicator for the wear pattern step.

Joe
----- Original Message -----
From: "Bryan Winberry" <bryanwinberry@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, November 19, 2009 9:24 PM
Subject: [FlyRotary] Re: End and intermediate housings


> Joe,
> Have you checked them for wear with a straight edge and feeler gauge?
> BW
>
> -----Original Message-----
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
> Behalf Of josrph berki
> Sent: Thursday, November 19, 2009 9:18 PM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] End and intermediate housings
>
> When rebuilding the 2nd gen do the cast iron housings need any treament or
> can they be used as is?  Cylinders ina piston engine are usually honed so
> new rings can seat what about side seals? Thanks for any help
>
> Joe Berki
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:
> http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html