Interesting
Steve,
If I decide
to hack up the intake, I might
try that.
BW
Hi Bryan
Ian Beadle and I have plastic welded the upper part of the Renesis
filler tube
to the lower section.
Ians been flying for some time, I haven’t yet.
Cheers
Steve Izett
Perth Western Australia
Glasair SIISRG Renesis 4 Port RD1-C EC2 EM3
On 17/11/09 6:29 AM, "Bryan Winberry" <bryanwinberry@bellsouth.net>
wrote:
Joe,
What are you going to use for a filler tube and cap? My renesis tube
is
unusable as it connects to the intake assembly which has the rest of
the
tube(plastic) and cap.
Anyone else, feel free to respond.
Thanks,
Bryan
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
On Behalf Of josrph
berki
Sent: Monday, November
16, 2009
5:21 PM
To: Rotary motors in aircraft
Subject: [FlyRotary]
Re: Oil
Filler tube
Thanks everyone. I got
it out. I should have done this prior
to disassembly.
----- Original Message
-----
From: James Maher <mailto:delta11xd@att.net>
To: Rotary motors in aircraft <mailto:flyrotary@lancaironline.net>
Sent: Sunday, November
15, 2009 9:32 PM
Subject: [FlyRotary] Re:
Oil Filler tube
You can tap it from side to side with a rubber
hammer while pulling it out.
It is not very hard to get out.
--- On Sun, 11/15/09, josrph
berki <jskmberki@windstream.net>
wrote:
From: josrph berki <jskmberki@windstream.net>
Subject: [FlyRotary] Oil Filler tube
To: "Rotary motors in aircraft"
<flyrotary@lancaironline.net>
Date: Sunday, November 15, 2009, 4:00 PM Does
anyone
have a trick for extracting the oil filler tube out of the
intermediat housing? Thanks for any help.
Joe Berki
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
-- This message has
been checked by ESVA and is believed to
be clean.
The
contents of this email are confidential
and intended only for the named recipients of this e-mail. If you have
received
this e-mail in error, you are hereby notified that any use,
reproduction,
disclosure or distribution or the information contained in this e-mail
is
prohibited. Please notify the sender immediately and then
delete/destroy the
e-mail and any printed copies. All liability for viruses is excluded to
the
fullest extent of the law.