Hi Bryan
Ian Beadle and I have plastic welded the upper part of the Renesis filler tube to the lower section.
Ians been flying for some time, I haven’t yet.

Cheers
Steve Izett
Perth Western Australia
Glasair SIISRG Renesis 4 Port RD1-C EC2 EM3



On 17/11/09 6:29 AM, "Bryan Winberry" <bryanwinberry@bellsouth.net> wrote:

Joe,
What are you going to use for a filler tube and cap?  My renesis tube is unusable as it connects to the intake assembly which has the rest of the tube(plastic) and cap.
Anyone else, feel free to respond.
Thanks,
Bryan
 

---

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of josrph berki
Sent: Monday, November 16, 2009 5:21 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Oil Filler tube


Thanks everyone.  I got it out.  I should have done this prior to disassembly.

----- Original Message -----

From: James Maher <mailto:delta11xd@att.net>  

To: Rotary motors in aircraft <mailto:flyrotary@lancaironline.net>  

Sent: Sunday, November 15, 2009 9:32 PM

Subject: [FlyRotary] Re: Oil Filler tube



   You can tap it from side to side with a rubber hammer while pulling it out.
  It is not very hard to get out.
 
 --- On Sun, 11/15/09, josrph berki <jskmberki@windstream.net> wrote:
 

From: josrph berki <jskmberki@windstream.net>
 Subject: [FlyRotary] Oil Filler tube
 To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
 Date: Sunday, November 15, 2009, 4:00 PM  Does anyone have a trick for extracting the oil filler tube out of the
 intermediat housing?  Thanks for any help.
 
 Joe Berki
 
 
 --
 Homepage:  http://www.flyrotary.com/
 Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
 

 

-- This message has been checked by ESVA and is believed to be clean.

---

The contents of this email are confidential and intended only for the named recipients of this e-mail. If you have received this e-mail in error, you are hereby notified that any use, reproduction, disclosure or distribution or the information contained in this e-mail is prohibited. Please notify the sender immediately and then delete/destroy the e-mail and any printed copies. All liability for viruses is excluded to the fullest extent of the law.