Mailing List flyrotary@lancaironline.net Message #49109
From: Bobby J. Hughes <bhughes@qnsi.net>
Subject: RE: [FlyRotary] Re: Oil Filler tube
Date: Mon, 16 Nov 2009 16:54:34 -0600
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Bruce T inserted a pre-renesis oil filler neck and used JB weld to seal it.
 
Bobby


From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bryan Winberry
Sent: Monday, November 16, 2009 4:30 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Oil Filler tube

Joe,

What are you going to use for a filler tube and cap?  My renesis tube is unusable as it connects to the intake assembly which has the rest of the tube(plastic) and cap.

Anyone else, feel free to respond.

Thanks,

Bryan

 


From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of josrph berki
Sent: Monday, November 16, 2009 5:21 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Oil Filler tube

 

Thanks everyone.  I got it out.  I should have done this prior to disassembly.

----- Original Message -----

From: James Maher

Sent: Sunday, November 15, 2009 9:32 PM

Subject: [FlyRotary] Re: Oil Filler tube

 

You can tap it from side to side with a rubber hammer while pulling it out.

It is not very hard to get out.

--- On Sun, 11/15/09, josrph berki <jskmberki@windstream.net> wrote:


From: josrph berki <jskmberki@windstream.net>
Subject: [FlyRotary] Oil Filler tube
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Date: Sunday, November 15, 2009, 4:00 PM

Does anyone have a trick for extracting the oil filler tube out of the
intermediat housing?  Thanks for any help.

Joe Berki


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html

 

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster