flyrotary@lancaironline.net Mailing List Archive

Joe,

What are you going to use for a filler tube and cap? My renesis tube is unusable as it connects to the intake assembly which has the rest of the tube(plastic) and cap.

Anyone else, feel free to respond.

Thanks,

Bryan

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of josrph berki
Sent: Monday, November 16, 2009 5:21 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Oil Filler tube

Thanks everyone. I got it out. I should have done this prior to disassembly.

----- Original Message -----

From: James Maher

To: Rotary motors in aircraft

Sent: Sunday, November 15, 2009 9:32 PM

Subject: [FlyRotary] Re: Oil Filler tube

You can tap it from side to side with a rubber hammer while pulling it out.

It is not very hard to get out.

--- On Sun, 11/15/09, josrph berki <jskmberki@windstream.net> wrote:

From: josrph berki <jskmberki@windstream.net>
Subject: [FlyRotary] Oil Filler tube
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Date: Sunday, November 15, 2009, 4:00 PM

Does anyone have a trick for extracting the oil filler tube out of the
intermediat housing? Thanks for any help.

Joe Berki

--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html