-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On Behalf Of sqpilot@earthlink
Sent: Sunday, December 21, 2003 7:14 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Help !!!

Hi, Bill.....I'm such an idiot.....maybe I should be building a bicycle instead. (Come to think of it, that's how the Wright bros. started).  Item number 3 does NOT have two wires. It appears to be a drain, just as you said.  I neglected to take a picture of the item that truly DOES have two wires on it. It is located just above the top spark plug closest to the water pump. My guess is that's a temp sender, probably takes the place of a cylinder head temp on a Lycoming?  Here is a picture.  Thanks for setting me straight.  Now, if I can just get my pictures in order.....  Paul Conner

----- Original Message -----

From: William

To: Rotary motors in aircraft

Sent: Sunday, December 21, 2003 8:19 PM

Subject: [FlyRotary] Re: Help !!!

Item 3 is the block drain for coolant. Mine has no wires coming from it, and from your picture, neither does yours.

Bill Schertz
KIS Cruiser # 4045

----- Original Message -----

From: sqpilot@earthlink

To: Rotary motors in aircraft

Sent: Sunday, December 21, 2003 5:27 PM

Subject: [FlyRotary] Help !!!

Hi, fellow rotary enthusiasts.....I finally got my EFI system wired up, and I am now attempting to hook up the last few items so I can start this thing up, make noise and scare the neighbors.  I took a few photos, and labeled the items in question....I don't know what these sensors and connections are or should be.  Any help would be much appreciated. It is a 1989 turbo model engine, if that helps.  I will send this message in two parts, so download times won't be so bad. Items one and two are just underneath the oil cooler. Item #1 is a small threaded sensor with two wires coming out of it.  Item #2 is Larger, and has two connectors at the end.

     In the second picture, Item #3 also has 2 wires. It is octagon in shape.

     Item #4 is a plug on the lower tube of the water pump. I thought this might go to the turbo, if one were installed?

     Item #5  Is a plug on the upper section of the water pump, next to the water temp sensor.  (I actually figured out  and wired the water temp sensor, all by myself).

     Item #6 is another sender of some type, with two wires coming out of it.

Thanks in advance for your assistance in identifying these items.  I know many of you have been there and done that.  sincerely, Paul Conner

---

>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html