The first bad news is that I replaced my remote oil filter mount and installed a new filter. As I have mentioned here I have had it leaking at the rubber filter seal. The old one looked ok, but since replacing the filters no less than three times and knowing that the eye cannot see all imperfections, I replaced the mount AND filter (K&N 2004 filter). But, NO JOY. It is still leaking where the filter mounts. It IS seeping from the filter seal and NOT the two hose connections...no doubt on this. I know the rotary's oil pressure is higher than other engines but I would not think it would be so much that it is overwhelming this standard mount and seal. This is just a standard screw on remote oil mount made out of AL...Made in the USA. Looks like many others I have seen. Y'all have any ideas.
I anxiously wait commentary and possible explanations from y'all. Upon my return to the hangar (today was MY Sunday) hopefully tomorrow night after work I will be looking at my, apparently piss poor, wiring.
Filter Cross Reference for K&N Part HP-3001
Use this cross reference as a reference guide only! Use our application search to determine the K&N filter that correctly fits your vehicle.
ManufacturerPart Number
ACHD222
ACPF2
ACPF2149
ACPF2217
ACPF41010
ACPFAFL1A
ACPFL1A
ACPFW1120
ACX61
CHAMPION LAB.HP1
CHAMPION LAB.PH2815
CHAMPION LAB.PH8A
FRAMHP1
FRAMP8427
FRAMPH2815
FRAMPH2879
FRAMPH3381
FRAMPH3569
FRAMPH4854
FRAMPH7650
FRAMPH8A
MOBIL1M1301
MOTORCRAFTAFL1
MOTORCRAFTFL1A
MOTORCRAFTFL1HP
MOTORCRAFTFL281
ONAN122P193
PUROL30001
PUROL30119
PUROL30257
PUROL30341
PUROL37673
PUROL38257
PUROL39001
PUROL40316
WIX41515
WIX51515
WIX51525
WIX51545
WIX51622
WIX51775
As always my friends, Thanks.
All the best,
Chris Barber
Houston
The K&N filter for most of the remote filter stands is the HP-3001 and it replicates the above filters. The K&N or any of these should work on anything designed for the Fram PH8A. The universal (anything Ford) filter.
Home | Search for Products | Where to Buy | Facts | Testimonials | FAQ's | News & Events | Contact K&N
K&N Product Information for HP-3001
Oil Filters > Oil Filter
Originally developed for demanding race applications, our premium Performance Gold® Oil Filter is rapidly becoming a favorite among consumers for its durability and easy removal. Most of our automotive and marine oil filters come with a 1” nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. We use thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. The drilled hole on the nut provides for safety wire attachment. Our oil filters also use a resin impregnated cellulose filter media. This allows for higher flow rates while providing outstanding filtration. [MORE]
Part HP-3001 Product Specifications
Product Style: Oil Filters
Height: 5.7 in (145 mm)
Outside Diameter: 3.65 in (93 mm)
Thread Inside Diameter: 0.75
Thread Number: 16UNF-2B
PSI Relief Valve: 8-11
Anti Drain Back Valve: Yes
Style: Canister
Weight: 1.6 lb (0.7 kg)
Product Box Length: 3.81 in (97 mm)
Product Box Width: 3.81 in (97 mm)
Product Box Height: 5.42 in (138 mm)
K&N HP-3001 Inventory Status
USA: In stock
United Kingdom: In stock
Available Information
HP-3001 Vehicle Applications
HP-3001 Cross Reference
Large Picture
Medium Picture
Small Picture
News Story - Performance Add-ons for Your Ford Ranger Pickup Truck
News Story - The Ford Explorer, Sport and Sport Trac Get Power and Performance from K&N Products
News Story - Performance Upgrades for the Audi A4 Quattro Protect Your Engine
News Story - Simple Volkswagen Passat Performance Additions
The WIX 51515 has a 350 pound burst can and I used it on the race car until I came across the K&N at 450 pound burst. WIX is available at any NAPA store.
Check to see if the rubber seal ring sits flat on the sealing face of the remote filter stand. Probably the filter end plate is tight against the stand before the gasket is properly clamped.
I use a double filter stand designed for the Fram PH-8A and use the K&N hp-3001 filters. Not a single problem in 10 years. I run 100 to 105 pounds of oil pressure.
Lynn E. Hanover
I can wire a house, but that electronics stuff is black magic to me. No help there.
|