Return-Path: Sender: (Marvin Kaye) To: flyrotary Date: Wed, 30 Oct 2002 19:44:58 -0500 Message-ID: X-Original-Return-Path: Received: from out001.verizon.net ([206.46.170.140] verified) by logan.com (CommuniGate Pro SMTP 4.0) with ESMTP id 1848573 for flyrotary@lancaironline.net; Wed, 30 Oct 2002 12:06:30 -0500 Received: from verizon.net ([4.63.186.11]) by out001.verizon.net (InterMail vM.5.01.05.09 201-253-122-126-109-20020611) with ESMTP id <20021030170630.MMBB3265.out001.verizon.net@verizon.net> for ; Wed, 30 Oct 2002 11:06:30 -0600 X-Original-Message-ID: <3DC011B0.7020103@verizon.net> X-Original-Date: Wed, 30 Oct 2002 09:06:56 -0800 From: Rick Girard User-Agent: Mozilla/5.0 (Windows; U; Win98; en-US; rv:1.0.1) Gecko/20020823 Netscape/7.0 X-Accept-Language: en-us, en MIME-Version: 1.0 X-Original-To: " (Rotary motors in aircraft)" Subject: Re: [FlyRotary] Re: engine stands References: Content-Type: multipart/alternative; boundary="------------000509080809010600030707" X-Authentication-Info: Submitted using SMTP AUTH PLAIN at out001.verizon.net from [4.63.186.11] at Wed, 30 Oct 2002 11:06:27 -0600 --------------000509080809010600030707 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Wankelers, As I posted before, my one data point experience with the > rotary, The Harbor Freight engine stand ($39.95 on sale) fits the > rotary from the flywheel side if you are using the auto trans flex > plate. All you need are four 10 X 1.75 X 75 mm bolts. Trim about 10mm > (3/8") from the threads on the two you use for the bottom two holes. > The hollow dowels in the end plate fit right into the arms of the > engine stand. When your done using it, it breaks down nicely for storage. > > Rick Girard I think the threads in the end housing are 10mm x 1.25mm (thread pitch). Tracy Oops! Tracy's right. Just measured the bolts with an SPI metric thread gage. They are 10 X 1.25 X 75mm. Hope nobody raced out to buy. Rick Girard --------------000509080809010600030707 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit 
Wankelers,  As I posted before, my one data point experience with the 
> rotary,  The Harbor Freight engine stand ($39.95 on sale) fits the 
> rotary from the flywheel side if you are using the auto trans flex 
> plate.  All you need are four 10 X 1.75 X 75 mm bolts.  Trim about 10mm 
> (3/8") from the threads on the two you use for the bottom two holes. 
>  The hollow dowels in the end plate fit right into the arms of the 
> engine stand. When your done using it, it breaks down nicely for storage.
> 
> Rick Girard


I think the threads in the end housing are 10mm x 1.25mm (thread pitch).

Tracy

Oops!  Tracy's right. Just measured the bolts with an SPI metric thread gage.  They are 10 X 1.25 X 75mm.  Hope nobody raced out to buy.

Rick Girard
--------------000509080809010600030707--