Mailing List flyrotary@lancaironline.net Message #4599
From: Ken Welter <rotary.coot@verizon.net>
Subject: [FlyRotary] Re: Heaters/defrosters
Date: Wed, 3 Dec 2003 20:17:39 -0800
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
  If you are planing on flying into real cold weather I think you would have to recirculate inside are rather than try and heat cold outside air.
 Still could be done with two flapper valves and a fan.

 Ken


I'm building a cozy MKIV, and I plan to use a heater core, which will run
coolant through it all of the time, and act as secondary cooling.  I will
then use a flapper to either dump the output air from the heater core into
the engine compartment, or into the cabin.

Steve Brooks


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster