|
[FlyRotary] Re:
Heaters/defrosters
I think I missed the point on
that one, the photo is one off my water heater, as for the oil cooler
no it is unmodified and has the thermostat in it but some oil still
flows through the cooler all the time, the oil will stay at about 170
degrees until the outside temp reaches about 20 and then it starts
going down from there, at 30 below zero outside temp the oil temp
needle wont even move off the stop.
Ken
I didn't use
the Mazda cooler, used an after market.
Ken
Ken,
Did you alter the oil cooler bypass? The stock oil
cooler has a bypass that prevents oil from circulating
through it when the oil temp is below 140F degrees.
This helps to warm the oil faster on cold days.
Jim
|