|
|
Yes, I didn't figure the information would help you much. :) Hopefully
it will alert the next builder that needs them and they won't have to
spend $34 for them. I don't know why the auto suppliers don't have
those available at a "reasonable" price. I was in a Auto Zone a while
back and found they were selling the little wire seal for a similar
connector for about a buck a piece in a package of 4 or 5. Those
things wholesale for about 8 cents. I don't think they even had the
rest of the connector parts.
BTW, I'm just back from an out of town trip and catching up on a few
hundred emails, so a little slow to respond.
Bob W.
It would have been great to fly this trip if I had an airplane. :(
On Tue, 20 Jan 2009 07:28:02 -0600
Mark Steitle <msteitle@gmail.com> wrote:
> Bob,
>
> Now you tell me!!! Actually, I don't think you were selling those back when
> I was in the market for coils/connectors. $6.30 is a great price. Its
> water under the bridge now.
>
> Mark
>
> On Mon, Jan 19, 2009 at 10:03 PM, Bob White <bob@bob-white.com> wrote:
>
> > Hi Mark,
> >
> > I have those connectors for $6.30 each, and if you want leads
> > installed, $14.95. I have both the smaller ones for the D581/D585 and
> > the larger ones for the D580.
> > http://roblinstores.com/cables/index.php?main_page=index&cPath=2
> >
> > Bob W.
> >
> > On Thu, 15 Jan 2009 07:10:54 -0600
> > "Mark Steitle" <msteitle@gmail.com> wrote:
> >
> > > David,
> > >
> > > I bought six new LS-1 coils from A-Line Auto Parts a few years ago for
> > > $28/ea. Unfortunately, the connectors were not included, they were
> > $32/ea.
> > >
> > >
> > > Mark S.
> > >
> > > On Wed, Jan 14, 2009 at 8:13 PM, John Downing <downing.j@sbcglobal.net
> > >wrote:
> > >
> > > > David, take a look at www.rockauto.com I believe I paid about
> > $42.00
> > > > ea for them. JohnD
> > > >
> > > > ----- Original Message -----
> > > > *From:* David Moyer <davidm@remconinc.com>
> > > > *To:* Rotary motors in aircraft <flyrotary@lancaironline.net>
> > > > *Sent:* Wednesday, January 14, 2009 5:20 PM
> > > > *Subject:* [FlyRotary] Ignition Coils / Fuel System
> > > >
> > > > I need some recommendations for a good place to find the best Ignition
> > > > Coils. I am looking at the D585 coils. I have thought about getting a
> > set of
> > > > used coils, but the more I think about it the less I would like to fly
> > with
> > > > used coils.
> > > >
> > > > There are cheap D585 coils on eBay for $20/ea which seems like they
> > might
> > > > be sub par as pricing from local Autozone is about $60/ea.
> > > >
> > > > Also wonder what pressure regulator everyone is running, also any
> > > > suggestions for gascolators?
> > > >
> > > >
> > > > David Moyer
> > > > davidm@remconinc.com
> > > >
> > > >
> > > >
> > >
> >
> >
> > --
> > N93BD - Rotary Powered BD-4 - http://www.bob-white.com
> > 3.8 Hours Total Time and holding
> > Cables for your rotary installation - http://roblinstores.com/
> >
> > --
> > Homepage: http://www.flyrotary.com/
> > Archive and UnSub:
> > http://mail.lancaironline.net:81/lists/flyrotary/List.html
> >
>
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/
|
|