Mailing List flyrotary@lancaironline.net Message #44244
From: Tracy Crook <tracy@rotaryaviation.com>
Sender: <rwstracy@gmail.com>
Subject: Re: [FlyRotary] rv8 engine mount
Date: Wed, 12 Nov 2008 06:06:34 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
Best I could measure, the stock dimension is 37.5"   Mine is close to 40" due to the extra length of the 20B.  I simply glassed a round collar extension behind the prop spinner to get the extra length.  I think this improved the looks and getting the prop further away from the cowl is aerodynamically better.

Tracy Crook
 

On Tue, Nov 11, 2008 at 11:48 PM, Blake Lewis <blake.lewis@gmail.com> wrote:
Tracy or others building RV8s,
What is the stock distance from firewall to prop flange on the RV8,
and/or what is the distance your using?

--
Blake C. Lewis

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster