9-18-08   7:30 PM  cold start on, mix. to max.-clockwise-poss., key in/on, master, gen., elect., fuel pump, CLEAR PROP, push gold button, crank;;; crank;;; mix. to min., cold start off, eng. starts/runs up to 2200 rpm, dialed down to 1400 rpm, did not run long coolant sensor is reading 65034 deg.F, need to diog. elect.  Thanks to all Rotor-Heads on this list & others for helping to make this event possible & nearly error free, trim paint nearly complete, first flight just around the corner, extra THANKS  to Ed Anderson, Tracy/ Laura Crook, Bill Eslick (web site).                     Thanks again;  David R. Cook, RV6A Rotary eng. running.