Received-SPF: pass
 receiver=logan.com; client-ip=72.52.218.78; envelope-from=bob@bob-white.com
Date: Sun, 3 Aug 2008 16:02:05 -0600
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Generator development
Message-Id: <20080803160205.2a78c376.bob@bob-white.com>
In-Reply-To: <list-3054399@logan.com>
References: <list-3054399@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Isn't Tracy saying the clutch plate works, but it really isn't doing
much and it only helps in extreme situations, not in normal operation?

Bob W.


On Mon, 4 Aug 2008 07:57:47 +1000
"George Lendich" <lendich@optusnet.com.au> wrote:

> 
> 
> > George Lendich wrote:
> >>> Oh!  I'm good then.  Tracey has already spoken  8*)
> >>>
> >>> http://www.rotaryaviation.com/PSRU Zen Part 2.html
> >>>
> >>> I agree with him, for what that's worth.
> >>> BTW, I should have put a smiley at the end of my previous message.  
> >>> It seems a little short, reading it now.
> >>
> >> So Ernest, what are you saying, I couldn't get that html to work. I'm 
> >> guessing your saying, the logic of your choice is in imbedded in that 
> >> paper?
> >> Always willing to hear another point of view, especially if proven.
> >> George ( down under)
> > Ooops!  Seems Tracey has some spaces embedded in the names of some of 
> > the pages on his website.  This one should work.
> > 
> > http://www.rotaryaviation.com/PSRU%20Zen%20Part%202.html
> 
> Thanks Ernest,
> I now understand your reasoning.
> George (down under)
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/cables/