Return-Path: <marv@lancaironline.net>
Sender: <marv@lancaironline.net> (Marvin Kaye)
To: flyrotary
Date: Sat, 26 Oct 2002 10:02:00 -0400
Message-ID: <redirect-1845511@logan.com>
X-Original-Return-Path: <eanderson@carolina.rr.com>
Received: from ncsmtp03.ogw.rr.com ([24.93.67.84] verified)
  by logan.com (CommuniGate Pro SMTP 4.0)
  with ESMTP id 1845495 for flyrotary@lancaironline.net; Sat, 26 Oct 2002 09:00:43 -0400
Received: from mail6.carolina.rr.com (fe6 [24.93.67.53])
	by ncsmtp03.ogw.rr.com (8.12.5/8.12.2) with ESMTP id g9QD0QiZ015839
	for <flyrotary@lancaironline.net>; Sat, 26 Oct 2002 09:00:26 -0400 (EDT)
Received: from o7y6b5 ([24.25.90.153]) by mail6.carolina.rr.com  with Microsoft SMTPSVC(5.5.1877.757.75);
	 Sat, 26 Oct 2002 09:00:46 -0400
X-Original-Message-ID: <001b01c27cf0$7c4cd300$1702a8c0@WorkGroup>
From: "Ed Anderson" <eanderson@carolina.rr.com>
X-Original-To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-1845446@logan.com>
Subject: Re: [FlyRotary] Re: engine stand?
X-Original-Date: Sat, 26 Oct 2002 09:06:23 -0400
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2600.0000
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000


----- Original Message -----
From: "Marvin Kaye" <marv@lancaironline.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, October 26, 2002 8:52 AM
Subject: [FlyRotary] Re: engine stand?


>
>
> Posted for "Dean Head" <banana@atlantic.net>:
> Group,
> I am looking for ideas for an adaptor for my conventional engine stand to
> hold the 13b during assembly.
> Thanks
> Dean
>
>
> [FWIW, I took 2 pieces of 4" AL angle and bolted them together into a U.
One
> leg of the U bolts to the engine stand, the other to the front housing.
You
> could also buy a small piece of structural channel and do the same job...
I
> just happened to have the 4" AL stuff sitting around.
>
>         <Marv>           ]

Dean,
    I used a piece of 3/8" thick 4"  iron channel I saw at a welding shop,
drilled some large holes to hold the angle to the stand and then drilled
holes to match the front iron side housing (where the large bolt holes for
mounting the airconditioner/etc goes).

  What ever you come up with, try to make certain it doesn't interfer with
such things as removing sparkplugs or other items as you do the tear down.
Also try to match the C.G of the engine to the pivot point of your engine
stand as best you can - that will preclude the engine from suddenly swapping
ends should the pivot bolt slip {:>)

Ed Anderson