Mailing List flyrotary@lancaironline.net Message #42912
From: Jason Hutchison <Hutchison.Jason@mbco.com>
Subject: Hushpower muffler update
Date: Mon, 19 May 2008 16:22:42 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message

As Tracy mentioned, my Hushpower developed cracks in the seam with less than 50 hrs. I welded the seams up before I left for SNF. On the way home from SNF it opened up. Split down both sides and developed a three inch crack over the top of the muffler. I have reconfigured to a 2.5 inch Hushpower muffler with internal baffles welded in the pipe pre muffler.  I have a couple of short flight and a 300nm xcountry on the new setup. I will keep you guys posted.

 

Jason

"This e-mail may contain confidential and/or legally proprietary material for the sole use of the intended recipient. Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies."
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster