Mailing List flyrotary@lancaironline.net Message #42842
From: Ed Klepeis <techwelding@comcast.net>
Subject: Re: [FlyRotary] Oil/water cooler
Date: Wed, 14 May 2008 14:47:33 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Dear Al
        I make an exact copy of the oil/water that Fluidyne use to make. With the larger size cooler you could may be could do away with the air/oil cooler. See the cooler I make on my web site techwelding.com thanks
                                                                                                        Regards
                                                                                                       Ed Klepeis
----- Original Message -----
From: Al Gietzen
Sent: Wednesday, May 14, 2008 1:16 PM
Subject: [FlyRotary] Oil/water cooler

Who makes the water/oil cooler system I've heard about, and does it work???

Thanks again.

 

I recently installed a MoCal Laminova 43-330 oil/water heat exchanger as a backup to my oil/air cooler.  It works as advertised; and will handle roughly ¼ - 1/3 of the heat load for the 20B. That was all I needed to keep my oil temps below max during climb on a hot day.

 

Setrab still makes a couple of units of lower capacity TOC-150 and TOC-200, but the larger TOC-300 is currently out of production.

 

Fluidyne no longer makes oil/water units, but some still show up now and then on e-bay.

 

C&R racing will make a higher capacity unit for you – at a price.

 

Al

 

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster