Return-Path: Received: from smtp-2u-1g.atlantic.net ([209.208.0.105] verified) by logan.com (CommuniGate Pro SMTP 4.1.6) with ESMTP id 2716175 for flyrotary@lancaironline.net; Sun, 09 Nov 2003 09:07:42 -0500 Received: from deanhead (gsvlflma-as-3-ip-157.atlantic.net [209.208.110.30]) by smtp-2u-1g.atlantic.net (8.11.6p2/8.11.0) with SMTP id hA9E7dp04945 for ; Sun, 9 Nov 2003 09:07:40 -0500 From: "Dean Head" To: "Rotary motors in aircraft" Subject: RE: [FlyRotary] Re: Powder coat gun Date: Sun, 9 Nov 2003 09:08:22 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Importance: Normal Thanks for the idea...I had been looking for some sort of in-wall kitchen oven to minimize the overall bulk. Your idea sounds better. Dean -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On Behalf Of Marvin Kaye Sent: Wednesday, November 05, 2003 8:54 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: Powder coat gun Posted for Dale Rogers : Dave, Making your own isn't "rocket science". You need a sheetmetal box large enough to hold your largest part (you can pop-rivet individual sheets together to form the box), cut holes every nine inches or so, to allow the full head of an IR lamp to go through it. The lamps will need to fill at least two of the side panels; for larger ovens, they'll need to go in the top too (but expect short lamp life on those. The most expensive part should be all the lamp sockets (for recessed ceiling lights). Dale R. > I bought one but have not used it yet. I am still looking for a suitable > used oven to bake the coated part and figure a place to put it in my shop. >> Homepage: http://www.flyrotary.com/ >> Archive: http://lancaironline.net/lists/flyrotary/List.html