|
The first rotary I took apart was a 13B out from a
'74 wagon. I still have some parts of it laying around.
Richard Sohn
N2071U
----- Original Message -----
Sent: Saturday, April 26, 2008 10:09
AM
Subject: [FlyRotary] Re: 1600 CC rotary
Development engine
So True, Bob. One reason while I may
be panting in anticipation (I will not be holding my breath
{:>)). Interesting, I had always thought the 12A had long preceded
the 13B so far as used in Mazda vehicles.
Ed.
----- Original Message -----
Sent: Saturday, April 26, 2008 11:02
AM
Subject: [FlyRotary] Re: 1600 CC rotary
Development engine
Dont count on that. In 1979 the RX7 came out with the 12A.
Mazda told us (Mazda dealers) at that time we would never see a 13B again.
Then in 84 we see the 13B again and in 86 the 12A was gone. I know for a
fact, as a Mazda dealer, that Mazda or any other manufacturer never really
knows where the market will take them.
-----Original
Message-----
From: Mark Steitle <msteitle@gmail.com>
To: Rotary
motors in aircraft <flyrotary@lancaironline.net>
Sent: Sat, 26 Apr
2008 9:31 am
Subject: [FlyRotary] Re: 1600 CC rotary Development
engine
Ed, Cool
video. Love that sound! Too bad the 3-rotor will likely never be
produced in mass again. Good thing it will most likely outlast my
flying career. Mark (not Mike)
On Sat, Apr 26, 2008 at 8:29 AM, Ed Anderson < eanderson@carolina.rr.com>
wrote:
Ah, Mike. You think perhaps you joke
about the 24B. Take a look at the video of this Mazda Concept car
With perhaps a 24B in it!!! If the 2 rotor 1600cc is suppose to put
out around 250HP the 3 rotor 1600 should blow everything with pistons out
of the air (figurative speaking of course)
Ed
----- Original Message -----
Sent:
Saturday, April 26, 2008 8:55 AM
Subject:
[FlyRotary] Re: 1600 CC rotary Development engine
...and I may just wait for the 24B.
;-) Mark
On Sat, Apr 26, 2008 at 7:14 AM, Ed Anderson
< eanderson@carolina.rr.com>
wrote:
Glad
you got it off, Bob. Sometimes having been there before can pay
off {:>)
Yes, compared to the car installation, even our
busiest aircraft installation looks anemic.
Well, rather than
replace my older 91 13B with a Renesis, I may just wait for the
16B (but, I won't hold my breath {:>))
Ed
----- Original
Message ----- From: "Bob White" <bob@bob-white.com>
To:
"Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent:
Friday, April 25, 2008 9:55 PM
Subject: [FlyRotary] Re: 1600 CC
rotary Development engine
Hi
Ed,
Your off list help on the number of studs on the RX-7
throttle body paid
off. I never could see the fourth nut,
but I stuck a socket and
extension on the fourth corner and it
locked on to something. After
turning it a while, the
throttle body came right off.
I always wondered why people
would let the oil injector feed lines get
brittle and crack
without checking them once in a while. Now I know.
Who the
hell could ever find them without a shop manual. There
are
more hoses, wires, and devices attached to that engine and I
don't even
want to know what they are for.
The 1600 cc
engine is beautiful, thanks for the pictures. If they
put
it in a car, they will add so much junk that you won't ever
see the
engine.
I like old cars with a few modern
improvements, like electronic
ignition and EFI. This week I
started my '74 Suburban for the first
time in a year. It
has electronic ignition, manual choke, and an
electric fuel pump.
After charging the battery overnight, it started
right up.
After 60 miles on the highway it was running as good
as
ever. (That only cost me about 25 bucks for gas which is
why it
hadn't been started for a year.)
Bob
W.
On Fri, 25 Apr 2008 14:18:16 -0400
"Ed
Anderson" <eanderson@carolina.rr.com>
wrote:
Things
been a bit quite of recently. How about a view of the 1600
cc rotary under development by Mazda. Those aluminum side
housing sure look nice. Rotor is thinner but larger in
diameter with a larger throw on the eccentric shaft for more
torque at all rpm. Saving my pennies.
Ed
The
message is ready to be sent with the following file or link
attachments:
13SparkPlugs.jpg
Note: To protect against
computer viruses, e-mail programs may prevent sending or receiving
certain types of file attachments. Check your e-mail
security settings to determine how attachments are
handled.
--
N93BD - Rotary Powered BD-4
- http://www.bob-white.com
3.8 Hours Total Time
and holding
Cables for your rotary installation - http://roblinstores.com/cables/
--
Homepage:
http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage: http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.23.5/1398 - Release Date: 4/25/2008
2:31 PM
|