Mailing List flyrotary@lancaironline.net Message #41545
From: Joe Ewen <Jewen@comporium.net>
Subject: Re: [FlyRotary] fitting
Date: Mon, 18 Feb 2008 07:37:00 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
Not sure if you need 16mm or 18mm, here are two sources for both sizes
 
Steel
11901 16mm X -10 (If I rember correctly this is -10)
11902 18mm X -10
 
Aluminum
Earls
9919EFJ 16mm X -8
9919EFK 18mm X -8
 
 
----- Original Message -----
Sent: Monday, February 18, 2008 4:00 AM
Subject: [FlyRotary] fitting

My home made fitting for the oil line on the front cover is leaking. Is there a source for a fitting that fits the Mazda threads and an AN #8 fitting?
 
Bob Mears
Supermarine Spitfire



Delicious ideas to please the pickiest eaters. Watch the video on AOL Living.
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster