flyrotary@lancaironline.net Mailing List Archive

I looked. The largest wire size I saw was 26 - good for TTL signals, don't know about ECU. Probably good enough for the coil drivers. What are the currents on the injector returns? Dale R. COZY MkIV #0497 Ch. 13 bmears9413@aol.com wrote: Wow..lots of selections. And I have absolutly no idea what any of them are. Bob Mears Supermarine Spitfire -----Original Message----- From: Ernest Christley <echristley@nc.rr.com> To: Rotary motors in aircraft <flyrotary@lancaironline.net> Sent: Wed, 13 Feb 2008 8:36 am Subject: [FlyRotary] Re: wire harness adaptor bmears9413@aol.com <mailto:bmears9413@aol.com> wrote: > This is kinda where I was afraid this would go....which is good. I was hoping for...."I know just what you need. Radio shack build a small 90 degree low profile pin connector".....I think I'll modify my tank. > You can get ribbon cable in thick gauges. http://www.mouser.com/Search/Refine.aspx?FS=TRUE&Ntt=*ribbon*+*cable*&Ne=254614+1447464&N=254614+1323038&Ntx=mode%2bmatchall&Ns=P_SField&OriginalKeyword=ribbon+cable&Ntk=Mouser_Wildcards <http://www.mouser.com/Search/Refine.aspx?FS=TRUE&Ntt=*ribbon*+*cable*&Ne=254614+1447464&N=254614+1323038&Ntx=mode%2bmatchall&Ns=P_SField&OriginalKeyword=ribbon+cable&Ntk=Mouser_Wildcards> in particular: http://www.spectra-strip.amphenol.com/ecpartsearch3.cfm?partID=321&cfid=158974&cftoken=78383325#Part%20Information <http://www.spectra-strip.amphenol.com/ecpartsearch3.cfm?partID=321&cfid=158974&cftoken=78383325#Part%20Information> Then there is the connectors: http://www.mouser.com/Search/Refine.aspx?FS=TRUE&Ntt=*ribbon*+*cable*&Ne=3977227+1447464&N=3977227+1323038&Ntx=mode%2bmatchall&Ns=P_SField&OriginalKeyword=ribbon+cable&Ntk=Mouser_Wildcards <http://www.mouser.com/Search/Refine.aspx?FS=TRUE&Ntt=*ribbon*+*cable*&Ne=3977227+1447464&N=3977227+1323038&Ntx=mode%2bmatchall&Ns=P_SField&OriginalKeyword=ribbon+cable&Ntk=Mouser_Wildcards> Click on "right" as the mounting angle, then apply the filter.