X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from fed1rmmtao107.cox.net ([68.230.241.39] verified) by logan.com (CommuniGate Pro SMTP 5.2.0) with ESMTP id 2728078 for flyrotary@lancaironline.net; Wed, 13 Feb 2008 11:05:15 -0500 Received-SPF: none receiver=logan.com; client-ip=68.230.241.39; envelope-from=dale.r@cox.net Received: from fed1rmimpo01.cox.net ([70.169.32.71]) by fed1rmmtao107.cox.net (InterMail vM.7.08.02.01 201-2186-121-102-20070209) with ESMTP id <20080213160432.OALX6359.fed1rmmtao107.cox.net@fed1rmimpo01.cox.net> for ; Wed, 13 Feb 2008 11:04:32 -0500 Received: from [192.168.1.104] ([72.223.44.12]) by fed1rmimpo01.cox.net with bizsmtp id p44U1Y00Q0Flgvc0000000; Wed, 13 Feb 2008 11:04:28 -0500 Message-ID: <47B3150C.4090903@cox.net> Date: Wed, 13 Feb 2008 09:04:28 -0700 From: Dale Rogers User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: Rotary motors in aircraft Subject: Re: [FlyRotary] Re: wire harness adaptor References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit I looked. The largest wire size I saw was 26 - good for TTL signals, don't know about ECU. Probably good enough for the coil drivers. What are the currents on the injector returns? Dale R. COZY MkIV #0497 Ch. 13 bmears9413@aol.com wrote: > Wow..lots of selections. And I have absolutly no idea what any of them > are. > > Bob Mears > Supermarine Spitfire > > > -----Original Message----- > From: Ernest Christley > To: Rotary motors in aircraft > Sent: Wed, 13 Feb 2008 8:36 am > Subject: [FlyRotary] Re: wire harness adaptor > > bmears9413@aol.com wrote: > > This is kinda where I was afraid this would go....which is good. I > was hoping for...."I know just what you need. Radio shack build a > small 90 degree low profile pin connector".....I think I'll modify my > tank. > > You can get ribbon cable in thick gauges. > http://www.mouser.com/Search/Refine.aspx?FS=TRUE&Ntt=*ribbon*+*cable*&Ne=254614+1447464&N=254614+1323038&Ntx=mode%2bmatchall&Ns=P_SField&OriginalKeyword=ribbon+cable&Ntk=Mouser_Wildcards > > > in particular: > http://www.spectra-strip.amphenol.com/ecpartsearch3.cfm?partID=321&cfid=158974&cftoken=78383325#Part%20Information > > > Then there is the connectors: > http://www.mouser.com/Search/Refine.aspx?FS=TRUE&Ntt=*ribbon*+*cable*&Ne=3977227+1447464&N=3977227+1323038&Ntx=mode%2bmatchall&Ns=P_SField&OriginalKeyword=ribbon+cable&Ntk=Mouser_Wildcards > > > Click on "right" as the mounting angle, then apply the filter. >