Bill,

The spark plug without the conductor would definitely be a strange one.  I do sometimes overlook the simple stuff.  I always assume that it’s got to be something harder than what it usually turns out to be.

The good news is, that I know for a fact that a lot of things on the engine are in tip-top shape, after checking a lot of different things trying to find it.  A few new electrical connectors.  Cleaned the injector connectors, etc, etc.

 

Regards,

Steve

 

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On Behalf Of WRJJRS@aol.com
Sent: Monday, December 10, 2007 1:53 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Hard starting - problem solved

 

In a message dated 12/8/2007 12:36:34 PM Pacific Standard Time, cozy4pilot@gmail.com writes:

Steve,

 You have shown people on the list TWO of the items that were drummed into all of the Kawasaki technical training students when I was there. (A long time ago, probably before dirt!)

1) Check the simple stuff first! (If the engine won't run check for gas in the fuel tank BEFORE any other check is made!)

2) If it was running well and you changed something and then it doesn't run well find out what you messed up.

Not doing these things was grounds for failure. After checking the basics then continue downhill from there in a logical fashion. Some of the problems we gave candidates were diabolical, (clear nail polish on the spark plugs for instance), but instructive. Later these mantras saved me when a spark plug came from NGK that looked perfect, but lacked the copper core conductor. A production line fault. It doesn't happen often but it can happen. Glad that you were able to find both problems on the ground!

Bill Jepson

Check out AOL Money & Finance's list of the hottest products and top money wasters of 2007.