Subject: [FlyRotary] crank angle sensor
plug
Hi, fellow rotary enthusiasts....I am trying to
finish wiring up my Mirco-Tech ECU. I am at the stage where I need to
wire up the crank angle sensor. My CAS already has the Mazda, or factory
plug on it. Does anyone have, or know where I might obtain the mating
plug to complete my wiring? Thanks in advance for your replies. Paul
Conner
Paul,
I went to a salvage yard and
checked a few Rx-7s. Most still had the wiring harness in them including
the one with the other end of the plug you are looking for. clipped it
off and paid the man $5. If you have any salvage yards around you might
check there.
One thing to be careful about. While the
color code for the wires on the sensor end of the plug has stay fairly
consistent through the years I have looked at. The color code on the
other plug has changed from year to year. So, don't assume that you
match color to color - check it out.