|
|
Hi Scott,
It looks like Ed caught the important items. Here are a couple others to consider:
I believe you have an IVO prop, is it electric?
Do you have any strobes or rotating beacons?
Radio stack lighting?
You might want to consider interior lighting on 2 circuits. If you loose one circuit, you will not be in the dark.
Joe
----- Original Message ----- From: "Scott" <squiggles@yahoo.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, November 12, 2007 8:08 PM
Subject: [FlyRotary] Switches and Breakers
I realize, not unlike the prop question from a few months back, that many things are specific to the airplane one is building. However, it would be helpful to verify I haven't missed some obvious engine circuit or engine switch prior to sending these panels off to frontpanelexpress...
My Zenith 801 is setup with:
- 13b
- EC2
- EM2
- 2 FI Fuel pumps
- A four tank fuel system( 4x15 gallons ), the L&R outboard fuel tanks pump into the respective L&R inboard fuel tanks via two facet 40171 fuel pumps. These are labeled the Xfer Pumps.
- A single battery & single alternator setup.
Please take a moment to see the attached pictures for the panels in question...
Thank You.
-Scott
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
--------------------------------------------------------------------------------
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|