X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from cdptpa-omtalb.mail.rr.com ([75.180.132.120] verified) by logan.com (CommuniGate Pro SMTP 5.1.12) with ESMTP id 2385613 for flyrotary@lancaironline.net; Sat, 13 Oct 2007 21:35:42 -0400 Received-SPF: pass receiver=logan.com; client-ip=75.180.132.120; envelope-from=eanderson@carolina.rr.com Received: from edward2 ([24.74.103.61]) by cdptpa-omta03.mail.rr.com with SMTP id <20071014013506.ZVPV3971.cdptpa-omta03.mail.rr.com@edward2> for ; Sun, 14 Oct 2007 01:35:06 +0000 Message-ID: <002001c80e02$87385ac0$2402a8c0@edward2> From: "Ed Anderson" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Heater Outlet Threaded? Date: Sat, 13 Oct 2007 21:35:39 -0400 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.3138 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3138 Scott, I faced the same problem back in early days. I ended up threading the inside. I put a borrowed tampax down the tube coated with grease and carefully push the string in as well. Tapped the tube then reached inside the tube with a needle nose and grabbed the string and carefully pulled it out with all the metal shavings from the tapping operation. I was too chicken to try and pull the tube out. Ed ----- Original Message ----- From: "Scott" To: "Rotary motors in aircraft" Sent: Saturday, October 13, 2007 9:13 PM Subject: [FlyRotary] Heater Outlet Threaded? Hello Everyone... The attached photos depict the heater outlet. I had originally hoped to just use regular heater hose and barbed fittings. However, as my setup has come together there are just too many things trying to make too many turns. What I really needed was a 5/8" 45 degree or 90 degree barbed fitting. I tried my usual spot of fittingsandadapters.com , but no luck. Thus, I am considering tearing the fitting out of the housing and replacing it with an AN fitting which I can use with socketless hose or something of the like. It looks like the fitting is not pressed into the housing, but rather screwed in( I have been unsuccessful at turning it even using heat and cold ). Is it really screwed into the housing? If so, would it be to much to hope for it to be 1/2"npt? Any ideas on how to salvage the simple barbed on hose setup? Any info, thoughts, and references are appreciated.... Thx... -Scott ____________________________________________________________________________________ Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out. http://answers.yahoo.com/dir/?link=list&sid=396545433 -------------------------------------------------------------------------------- > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: > http://mail.lancaironline.net:81/lists/flyrotary/List.html >