Mailing List flyrotary@lancaironline.net Message #39871
From: Joe Ewen <Jewen@comporium.net>
Subject: Re: [FlyRotary] EC2 Ignition Test Mode
Date: Sat, 13 Oct 2007 21:33:23 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
Please disregard this question.  I found the answer to my own question, all 6 plugs should fire.  After correcting a short in the aux tach lines for rotors 2 and 3, all 6 fire.
 
Joe
----- Original Message -----
From: Joe Ewen
Sent: Saturday, October 13, 2007 8:27 PM
Subject: [FlyRotary] EC2 Ignition Test Mode

I have been testing my engine harness wiring.  When testing the ignition coils (Mode 8 engine not running, press store button), I am only getting a coil to fire on rotor 1.  Rotors 2 and 3 are not firing.  This is the same for both the Leading and Trailing coils.  Is this how the EC2 normally works in test mode? or do I need to start rechecking the wiring harness.
 
Thanks,
Joe
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster