With the 2 rotor, both trailing and leading coils fire in
mode 8 for each rotor. Don't have a 3 rotor Ec2 but Al, Mark and others do
have. I would be surprised if only the number 1 rotor was suppose to fire,
but then I guess it could be that way on the 3 rotor
Ed
----- Original Message -----
Sent: Saturday, October 13, 2007 8:27
PM
Subject: [FlyRotary] EC2 Ignition Test
Mode
I have been testing my engine harness
wiring. When testing the ignition coils (Mode 8 engine not running,
press store button), I am only getting a coil to fire on rotor 1. Rotors
2 and 3 are not firing. This is the same for both the Leading and
Trailing coils. Is this how the EC2 normally works in test mode? or do I
need to start rechecking the wiring harness.
Thanks,
Joe