Hi Al,

Tracy's EC2 uses 35BTDC static timing as a starting point.  The
computer changes the actual timing to something else.

Bob W.


On Mon, 17 Sep 2007 23:35:00 EDT
WRJJRS@aol.com wrote:

>  
> In a message dated 9/17/2007 5:23:02 PM Pacific Standard Time,  
> ALVentures@cox.net writes:
>
> I have all the  latest updates on the EC2, and I have double checked the
> static timing set at  35o BTDC.  From that point on the EC2 is handling the timing
>  curve with rpm and MAP.
>
>
> Al, was 35° BTDC Tracys suggested timing? That sounds like too much lead to  
> me. I thought the base timing was closer to 25° than 35°. Not certain, but
> that  is the way I remember it. I think Lynn metioned running 28° total. Just the
> way  I remember it I certainly could be wrong.
> Bill Jepson
>
>
>
> ************************************** See what's new at http://www.aol.com
>


--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/