Bob,
I'm sure that there are a few "lurkers" who will be watching very closely to see how well your turbo holds up. Trailblazers always have a tougher time than those who follow along in their wakes.
Mark
On 7/16/07, Rogers, Bob J. <BRogers@fdic.gov> wrote:
Yes, it has an aftermarket Turbonetics 60-1 turbo with external wastegate and 1.15 A/R. I can vary the boost by 10 psi from the cockpit with a manual control regulator.
It remains to be seen how well it all works.
Bob
From: Rotary motors in aircraft [mailto:
flyrotary@lancaironline.net] On Behalf Of Mark Steitle
Sent: Monday, July 16, 2007 11:25 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Logbook Question
Look'n good Bob. Best I can tell you've got a turbo 13B under the cowl. Is that correct? Looks like we should have quite a showing at the next Rotary Roundup and/or Sun-n-Fun.
BTW, one nice thing that Ron Gowan did was to write a letter to the FAA stating that I built the a/c and recommended that I be granted a repairman's certificate. Not sure if it is necessary, but it sure won't hurt either.
On 7/16/07, Rogers, Bob J. <
BRogers@fdic.gov> wrote:
Thanks Mark,
Yes, I live in Plano, TX and have a hangar at the McKinney municipal airport. You can see and read about my project at
http://www.eaa1246.org/projectsnplanesdisplay.asp?id=10
I am currently working on the engine baffling. Everything else is pretty much done. But as you know, it is all the remaining little details that take forever.
Bob
From: Rotary motors in aircraft [mailto:
flyrotary@lancaironline.net] On Behalf Of Mark Steitle
Sent: Thursday, July 12, 2007 6:24 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Logbook Question
His phone number is 817/975-2138. Email is
rongowan@yahoo.com. I take it you live in the Dallas/Ft. Worth area?
On 7/12/07, Rogers, Bob J. <
BRogers@fdic.gov> wrote:
Mark,
I would like to use Ron Gowan as my DAR when the time comes to have my rotary powered Mustang II inspected (within the next year, I hope). Do you have a phone number for Ron that I could call to contact him?
Thanks,
Bob Rogers
----- Original Message -----
Sent: Monday, July 09, 2007 8:08 PM
Subject: [FlyRotary] Re: Logbook Question
The only thing he asked me to do was pay for his gas to fly down. He indicated that $10 would suffice, but we both know that that wouldn't hardly get him to the runup area. Due to all the heavy rains and overcast skies, we had trouble getting things coordinated. He flies for Delta out of Atlanta from Thursday through Sunday. He normally flies back from Atlanta on Sunday or Monday. Instead, he flew into Austin, rented a car and drove down to Lockhart, then drove north to Dallas afterwards. I gave him $150 to cover the car rental and gas. I had planned on taking him to have BBQ, but he was in a hurry to head home. He said that he does it as a service to the EAA community. It sure beats the local DAR's prices.
On 7/9/07, Christopher Barber <
CBarber@texasattorney.net > wrote:
Thanks for the update, success and the report on Ron Gowen. He is who I plan to call first as I have not only met him, he let me fly from the back seat of one of his Vari-EZ's when I was up in Denton visiting Alex a few years ago. I think he either has or had a rotory powered EZ (even though the one I flew in had a Lyc). The day I was there, he had just recieved a new Marconni PSRU. He was very pleased with it.
If you don't mind, would you please share the details of his cost and expectations as to come for a visit?
Congrats on turning your piles of fiberglass, metal and foam into a real honest to goodness flying machine.
----- Original Message -----
Sent: Monday, July 09, 2007 3:59 PM
Subject: [FlyRotary] Re: Logbook Question
Thanks for the words of encouragement. The rains have stopped here in central Texas, the sun is once again shining, and the doves returned to the ark with twigs in their mouths. The DAR came out to the airport today in his kayak and did the final inspection on my Lancair ES/20B project. And he actually signed it off!!! So, it is officially an "airplane" and no longer a "project". How about that? Its been a long haul, but now the fun begins... as soon as I get some recurrency training to bring me up to speed. He said I did a good job with much attention to detail, then he took my money and left. ;-) I'll should get the paperwork in the mail in a few days. Soon I'll be starting the 40-hour testing phase. I had asked for a 200 mile radius, but that would have put me over the Houston area, so he cut it down to 100 miles. He said that the FAA frowns on more than that, especially with auto conversions. So, I'lll have to make do with a 100 mile radius.
If anyone wants/needs a DAR with rotary experience, and you're in the Dallas/Ft. Worth area, I would highly recommend this inspector. His name is Ron Gowan. He has 500 hrs PIC flying a rotary. He also has composites experience. I felt that he would be a good choice even if he didn't have extensive composites experience.
He said the two biggest areas to pay very close attention is the psru and the cooling system. He said that the rotary engine is rock solid. (That really impressed the old timers at the airport.)
So, all you guys working away month after month, keep the faith, there is a glorious day coming. ;-)
On 7/7/07, Kelly Troyer <
keltro@att.net> wrote:
Pulling for you !! You will certainly have one going and
beautiful aircraft........Will absolutely be a plus for the Rotary
movement in general and a worthy addition to the somewhat
rare 20B engine group.......
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
-------------- Original message from "Mark Steitle" <
msteitle@gmail.com>: --------------
> Mark Steitle wrote:
>
>> Here's a non-rotary question for the group. The DAR will be
>> coming out Monday morning to inspect my project. Hopefully it
>> will qualify as an airplane once he's done. He mentioned to me to
>> be sure to have my airframe logbook so that he can make his
>> required log entry. (Here's the problem.) I don't have a logbook
>> yet. But according to an A&P on the Lancair list, the logbook can
>> be done in 3-ring binder format, or even on computer. I would
>> like to make one up in the 3-ring binder format, but don't have
>> any idea of what's required. Anyone on the list been through thi s
>> and have a page format they are willing to share? Mark S.
|