Received-SPF: none
 receiver=logan.com; client-ip=68.230.241.41; envelope-from=tonyslongez@cox.net
Message-ID: <3971748.1178242529310.JavaMail.root@fed1wml14.mgt.cox.net>
Date: Thu, 3 May 2007 18:35:29 -0700
From:  <tonyslongez@cox.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: intake manifold
Cc: Christopher Barber <CBarber@TexasAttorney.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Sensitivity: Normal


---- Christopher Barber <CBarber@TexasAttorney.net> wrote: 
> I have the Mistral intake, but like was stated, I am not flying yet.  It is
> a pretty unit.  Hope to be trying to start the dang engine thingamajig
> hanging on the back of my Velo pretty soon (yeah, I have been hopin' for a
> while).  I am well into wiring the duel alt/duel battery scheme, Z-14 in the
> Aeroconection book.  ECU wired, batteries, alt, contactors, regulator etc
> installed.  Now to get all the wires to play nice behind the panel
> 
> You can check out pictures of the intake on my website at
> www.lonestarvelocity.com
> 
> We considered trying to build the intake, (even fabricated a very heavy
> model) but figured that with our limited skill set and the PITA factor of
> trial and error and the associated cost we would likely come out a head just
> buying the intake.  Good luck.
> 
> All the best,
> 
> Chris
>

Chris

What did you pay for that? and how long did it take to get it?

Tony