X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from rwcrmhc13.comcast.net ([204.127.192.83] verified) by logan.com (CommuniGate Pro SMTP 5.1.2) with ESMTP id 1587987 for flyrotary@lancaironline.net; Tue, 21 Nov 2006 00:01:54 -0500 Received-SPF: none receiver=logan.com; client-ip=204.127.192.83; envelope-from=rlwhite@comcast.net Received: from quail.site (c-68-35-160-229.hsd1.nm.comcast.net[68.35.160.229]) by comcast.net (rwcrmhc13) with SMTP id <20061121050128m13004nth0e>; Tue, 21 Nov 2006 05:01:29 +0000 Date: Mon, 20 Nov 2006 22:02:08 -0700 From: Bob White To: "Rotary motors in aircraft" Subject: Re: [FlyRotary] Re: Renesis Electrical Connectors Message-Id: <20061120220208.1169e12f.rlwhite@comcast.net> In-Reply-To: References: X-Mailer: Sylpheed version 2.2.10 (GTK+ 2.8.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit I can get the GM type connectors, but nothing for the Mazda. On my CAS I cut off the Mazda connector and spliced in a 4 pin connector like the ones use on the coils. for the oil level sensor I crimped on a 1/4" Faston PIDG connector. Bob W. On Mon, 20 Nov 2006 15:43:41 -0500 wrjjrs@aol.com wrote: > Guys, > Check with Bob White? on the PL list. He has been obtaining some of the special harness connectors. I don't know if he has that one yet but he might be able to direct you. > Bill Jepson > > > -----Original Message----- > From: Wschertz@comcast.net > To: flyrotary@lancaironline.net > Sent: Mon, 20 Nov 2006 10:55 AM > Subject: [FlyRotary] Re: Renesis Electrical Connectors > > > You discovered the same thing I did when I went to get a connector for the Crank Angle Sensor on a 13-B. They will not sell them, only full harnesses. > Bill Schertz > -------------- Original message -------------- > From: Ben Schneider > All... > I just went to the local Mazda dealer, to get connectors for the Eccentric Shaft Position sensor, the oil pressure switch, and the low oil switch. They will only sell the entire engine wiring harness, and want almost $400 for it. NO THANKS!! > Anyone have any idea if they are a standard type connector that I can access somewhere else? Only other option is to solder leads onto them and pot the opening. Any ideas? > > Thank you for all the well wishes for my new son and family. This is a great group. > > Ben Schneider > > > > Sponsored Link > > Degrees online in as fast as 1 Yr - MBA, Bachelor's, Master's, Associate - Click now to apply > ________________________________________________________________________ > Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more. > -- N93BD - Rotary Powered BD-4 - http://www.bob-white.com First engine start 1/7/06 - Special Airworthiness Certificate 10/1/06 Cables for your rotary installation - http://www.roblinphoto.com/shop/