Return-Path: <13brv3@bellsouth.net> Received: from imf25aec.mail.bellsouth.net ([205.152.59.73] verified) by logan.com (CommuniGate Pro SMTP 4.1.4) with ESMTP id 2608478 for flyrotary@lancaironline.net; Mon, 29 Sep 2003 19:55:58 -0400 Received: from rad ([68.212.13.204]) by imf25aec.mail.bellsouth.net (InterMail vM.5.01.05.27 201-253-122-126-127-20021220) with ESMTP id <20030929235558.HLHT1843.imf25aec.mail.bellsouth.net@rad> for ; Mon, 29 Sep 2003 19:55:58 -0400 From: "Russell Duffy" <13brv3@bellsouth.net> To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Re: EDDIE free intake Date: Mon, 29 Sep 2003 18:56:00 -0500 Message-ID: <001e01c386e5$3bf153d0$0201a8c0@rad> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_001F_01C386BB.531B4BD0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.4510 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 In-Reply-To: This is a multi-part message in MIME format. ------=_NextPart_000_001F_01C386BB.531B4BD0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Or you can buy the setup from MazdaTrix for about 40-45$ In one of the photos showing the inlets to Paul's manifold you can see the ends of the 1/2" aluminum rods plugging the block injector holes.=20 =20 Thanks for the description, and also the tip about Mazdatrix. It took = some looking but I found the plug kit you mentioned. This is probably the = way I'll go. =20 =20 http://www.mazdatrix.com/SUPERCHG/OTHER.HTM =20 =20 I used a 3/8" flange and bolted to his manifold, but most people weld = the tubes into it. However they are using thick pipes rather than tubes. I brazed my tubes to the flange and then bolted it to the manifold, so I = could take it off (if things did not work out with that manifold).=20 =20 Amazing how you answered my exact question before I even asked it. =20 =20 Thanks again, oh keeper of valuable knowledge :-) Rusty =20 ------=_NextPart_000_001F_01C386BB.531B4BD0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Message
Or you can=20 buy the setup  from MazdaTrix for about 40-45$  In = one of=20 the photos showing the inlets to Paul's manifold you can see the ends of = the=20 1/2" aluminum rods plugging the block injector holes. 
 
Thanks for the = description,=20 and also the tip about Mazdatrix.  It took some looking but I found = the=20 plug kit you mentioned.  This is probably the way I'll go. =20
 
  http://www.mazdatrix= .com/SUPERCHG/OTHER.HTM     
 
I used a 3/8"=20 flange and bolted to his manifold, but most people weld the tubes into = it. =20 However they are using thick pipes rather than tubes.  I brazed my = tubes to=20 the flange and then bolted it to the manifold, so I could take it off = (if things=20 did not work out with that manifold). 
 
Amazing how = you answered=20 my exact question before I even asked=20 it.  
 
Thanks again, = oh keeper of=20 valuable knowledge :-)
Rusty
 
------=_NextPart_000_001F_01C386BB.531B4BD0--