|
|
Another good corrosion inhibitor is Boshield made by Boeing. Used it in marine environment for years. Contains wax that leaves protective film. Do not use WD-40. It is useless for this purpose since evaporates quite quickly.
Buly
On May 26, 2006, at 10:41 PM, Tracy Crook wrote:
Thought the coils were a long shot.
I'm still not sure where the connection that failed was (connector contact or the unknown connection at the end of the pigtail left by cutting the connector off the Mazda harness) but I do like treating all connector contacts with a corrosion inhibitor. My favorite is Corrosion X. I like soldered connections for this reason too. I'll do my own stress relief to get it away from the potential stiff connection at the solder joint. To each his own though.
Tracy (Granddaughter gone for the summer, Aahhhh.......... : )
-
|
|