Received-SPF: none
 receiver=logan.com; client-ip=201.225.225.167; envelope-from=rijakits@cwpanama.net
Message-ID: <00a401c68128$20b733b0$6e5de0c9@usuarioq3efog0>
From: "Thomas y Reina Jakits" <rijakits@cwpanama.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-1129099@logan.com>
Subject: Re: [FlyRotary] Re: Another case of heat-soaked coils?
Date: Fri, 26 May 2006 19:54:29 -0500
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Get some SP-400!

If you fancy it, mask the to be treated area - then aply a thin coat (shake
the can really well and repeat often...).
Get over any all connectors that are suspect to moisture.
It will form a thin wax like coat. Re-apply at least one more time after a
couple of hours or overnight.
Areas that are really in the "wet" you should apply up to 5 coats.
It takes a while to do a good job, but:
It is transparent - you alway see the connection
The coat gets a little harder with time, but always stays flexible

It made my day on a Bell-47 for 3 month on the ocean!!

TJ

----- Original Message ----- 
From: "John Slade" <sladerj@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, May 26, 2006 11:31 AM
Subject: [FlyRotary] Re: Another case of heat-soaked coils?


> Well it wasn't the coils after all.
> Florida humidity had gotten to one of my crank angle sensor connectors.
> Problem solved.
> Coils returned.
> $206 back in my pocket.
> Life is good
> John
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/