I'm trying to visualize all sorts of installations where a pair of rads/ oil coolers are required and limited space limits size and/or placement positions.

George (down under)

No, that would be a built in flow problem. So long as the flow paths are not outrageously dissimilar, there should be a good result.

 

The point is that even similar performance would be expected in a parallel system. More effort is going into the parallel VS series hookup than is required. Both work well and any differences are probably beyond detection without very special equipment. Both systems are flying daily with reasonable results.

 

Lynn E. Hanover

 

Thanks Lynn

George ( down under)