X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from mail28.syd.optusnet.com.au ([211.29.133.169] verified) by logan.com (CommuniGate Pro SMTP 5.0.5) with ESMTPS id 901997 for flyrotary@lancaironline.net; Mon, 26 Dec 2005 16:57:34 -0500 Received-SPF: none receiver=logan.com; client-ip=211.29.133.169; envelope-from=lendich@optusnet.com.au Received: from george (d211-29-171-145.dsl.nsw.optusnet.com.au [211.29.171.145]) by mail28.syd.optusnet.com.au (8.12.11/8.12.11) with SMTP id jBQLue1H016311 for ; Tue, 27 Dec 2005 08:56:43 +1100 Message-ID: <004c01c60a67$40b65c00$91ab1dd3@george> From: "george lendich" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: ANOTHER wrong flexplate. Date: Tue, 27 Dec 2005 07:56:39 +1000 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 Bob/Bill, I have the same flexplate, the OD is 320mm the depth varies slightly 32.3mm and the dished area is approx 195mm across. All the auto flexplates are 320mm, however the RX8 might be 300mm like the manual flywheel. George (down under) > Bill, > Here is a picture of the flex plate that I have. The measurement from the > table top to the top of the plate is 32.73mm, 1.291". That is a very rough > measurement > > Bob Perkinson > Hendersonville, TN. > RV9 N658RP Reserved > If nothing changes > Nothing changes > ---------------------------------------------------------------------------- ---- > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ >