In a message dated 9/8/2003 12:35:45 AM Eastern Daylight Time,
13brv3@bellsouth.net writes:

> Thanks for the pic.  Are you sure those are 13 row like you mentioned
>  before?  According to the Setrab info, a 13 row would only be 4.75 inches
>  long.  Those sure look longer than that, but of course it's hard to tell.
>  
>  In my original comparison, I looked at only the amount of tube length, or
>  primary cooling surface.  If you look at overall area of the cooler, the
>  Mazda unit seems much larger.  The Mazda unit has a core that's 19.5 x 5 x
>  2, for a volume of 195 cu in.  The 640 Setrab has a core volume of about
216
>  cu in, but appears to have almost 3 times the primary cooling surface when
>  you look at the number of tubes.  I think I've confused myself even more...
>  
>  Cheers,
>  Rusty

This just in.......All three coolers are P/N 50-634-4063. There is another
number below the part number, titled "Description Number" that is 634AN12. I
think that just calls out the outlet size, but may include that the cooler is a
34 row. The male outlets are AN-12.
If the top and bottom strap carry oil, it is a 34 row cooler. If not, it's a
32 row cooler.

It is 2" thick.  The body is 11 1/8" wide. It is 13" wide to the ends of the
mounting flanges.
The body is 10 3/8" tall. Including the outlet fittings it is 11 1/2" tall.
To the outside of a 90 degree dash 12 hose end, it is 13 1/4" tall.

Lynn E. Hanover