Received-SPF: none
 receiver=logan.com; client-ip=67.15.58.72; envelope-from=bob@bob-white.com
Date: Tue, 13 Sep 2005 08:54:16 -0600
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Ignition Coil Connectors
Message-Id: <20050913085416.3b00fc9f.bob@bob-white.com>
In-Reply-To: <list-720108@logan.com>
References: <list-720108@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hi George,

GM Parts Direct works best if you know the GM part number.

A 2002 Chevrolet Silverado 1500 w/ 5.3 L engine uses the D581 coil.

Here are the p/n's I know:
12558948  D580 igniter
12558693  D581 igniter
12569111  wiring harness (all 4 coils) for D580 coils
12102754  mating plug w/pigtail to 7 pin connector on 1256911

The 12569111 p/n is no longer valid.  I don't know what the new number
is.

The mating connector for the D580 coil is a Delphi 4 pin Metri Pack 150
sealed connector.  They can be purchased from Waytek in an odd
assortment of pieces, or from me in a convenient pack of four. :)

I also found this information on the AC Delco web site.  Using the 2002
Silverado, I searched for 'coil'.  Two ignition coils are listed, D581
and D585.  Three connectors are listed,  one is the 7 pin connector,
one is a 3 pin connector presumably for the D585, and one is a 4 pin
connector Delco p/n PT1627 which crosses to GM p/n 88987184.  This is
PROBABLY the correct connector for the D581, but it runs $36+ and
Nobody seems to have a picture of it.

I don't know if you wanted to know all this George, but I thought I
would summarize everything again.  I still have no clue as to what the
D581 connector is or where to get it commercially.  Tracy's solder to
the pins and pot it sounds real attractive.

Bob W.


On Tue, 13 Sep 2005 19:21:51 +1000
"George Lendich" <lendich@optusnet.com.au> wrote:

> Bob
> I found it but can't find the products - is there a year make model that I
> have to enter in the catalogue?
> George
> 
> > Again, Joe didn't write that.  I was addressing the next part of the
> > message to Joe.  Sorry for causing all the confusion.
> >
> > GM Parts Direct  http://www.gmpartsdirect.com/
> >
> > Bob W.
> >
> > On Tue, 13 Sep 2005 11:00:51 +1000
> > "George Lendich" <lendich@optusnet.com.au> wrote:
> >
> > > Joe,
> > > Being in Australia makes it that much harder to source specific
> > > things. Could you direct me to an email address for GM Parts Direct
> please
> > > Joe.
> > > TIA
> > > George ( down under)
> > >

-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)
Prewired EC2 Cables - http://www.roblinphoto.com/shop/